Epiphan VGA2USB Pro - Manual (Page 25)

9. Connecting a KVM2USB Device
User Guide Page 25
To connect a KVM2USB
Make sure that the video capture application is installed on the
video capture workstation before connecting the KVM2USB
Frame Grabber.
1 Connect the multi-connector end of the KVM cable to the
Headless server keyboard, video, and mouse ports. Use PS/2
to USB and DVI to VGA adapters if required.
2 Connect the single-connector end of the KVM cable to the
KVM2USB KVM input port.
3 Use the USB cable to connect the KVM2USB to a USB 2.0 port
on the administrator’s PC.
4 Start the video capture application and use the options on the
KVM menu to start and stop KVM operation.
Administrator’s
PC or laptop
Keyboard
Video
Mouse (KVM)
Headless
Server
USB Cable
KVM Input
Keyboard
and Mouse
Connections
VGA Signal
Output
Status/
Capture LED
Power Input
USB Output
USB Input