Epiphan VGA2USB Pro - Manual (Page 65)

12. Windows video capture application Menus
User Guide Page 65
Tools menu
Use the Tools menu to customize basic video capture application
operating settings. The Tools menu also contains commands for
special functions such as broadcasting captured images over the
Internet.
KVM menu
Use the KVM menu if you are using the Epiphan KVM2USB
Frame Grabber. See “Using the KVM2USB Frame Grabber” on
page 129 for more information.
Configure
Device
Override image adjustments, DirectShow options,
and select VGA modes for the current Frame
Grabber. See the following sections for more
information:
•
“Configuring image adjustments” on page 136
• “Configuring DirectShow options” on page 143
• “Configuring VGA modes” on page 145
Web
Broadcasting
Broadcast the images being captured by the
video capture application over the Internet. See
Chapter 16. “Web Broadcasting” on page 121 .
Upload EDID Use this command to upload an extended
display identification data (EDID) file to your
DVI2USB Frame Grabber. See “About EDID” on
page 133 .
Measure
VGA Mode
When requested by Epiphan technical support,
you can use this command to display low-level
information about the VGA mode that you are
capturing with your Frame Grabber. You can
copy this information into an email to send it to
Epiphan technical support.
Options Configure recording, display, KVM, and sharing
(Internet Broadcasting) settings. See “Recording,
display, KVM and sharing options” on page 69 .