Epiphan VGA2USB Pro - Manual (Page 58)

12. Windows video capture application Common procedures
Page 58 Epiphan Frame Grabber
To print a snapshot of the current image
You can use the following procedure to print the current image
on any printer that is connected to the video capture workstation.
You can optionally pause image capture before printing an
image.
1 Select Print from the File menu or from the toolbar select .
The current image is sent to the default printer. You can select
Print Setup from the file menu to select a different printer and
set printer options.
Note: You can also configure the video capture application to
invert colors for printing. From the Tools menu select Options
then select the Display tab and select Invert colors for printing.
Recording captured images
You can record captured images as a video file or as a series of
saved image files. In both cases the recording steps are the same.
To record captured images as a series of image files
Before recording captured images as a series of image files, you
must configure recording options by selecting Options from the
Tools menu, selecting the Recording tab, and selecting Record as
Images. You should also select the image file format and other
image file settings. See Chapter 14. “Recording image files” on
page 91 for the details.
1 Select Start Recording from the Capture menu or from the
toolbar select .
As images are captured by the Frame Grabber they are
recorded as a series of image files according to the image file
settings on the Recording tab of the Options dialog. The Status
bar shows the name and location of the last saved file.
You can pause recording by selecting Pause from the Capture
menu or from the toolbar.