Epiphan VGA2USB Pro - Manual (Page 13)

3. Installing the Windows VGA2USB/DVI2USB drivers and application
User Guide Page 13
4 Run the Setup Utility (setup.exe) and follow the prompts.
5 Connect your Frame Grabber, refer to the appropriate section:
• 5. “Connecting a VGA2USB Device” on page 16
• 6. “Connecting a DVI2USB Device” on page 18
• 7. “Connecting a DVI2USB Solo Device” on page 20
• 8. “Connecting a DVI2USB Duo Device” on page 22
• 9. “Connecting a KVM2USB Device” on page 24
Tip: If, after connecting your Frame Grabber, Windows
displays the Found New Hardware Wizard, respond to the
prompts before continuing with Step 6 .
6 Open the Windows Device Manager and confirm that
Windows has detected your product. Tip: Refer to
10. “Troubleshooting” on page 26 if you encounter problems.