Epiphan VGA2USB Pro - Manual (Page 122)

16. Web Broadcasting Setting the Display format for web broadcasting
Page 122 Epiphan Frame Grabber
Setting the Display format for web
broadcasting
Before starting web broadcasting you must set the video capture
application display format to RGB 24 bits per pixel.
To set the Display format for web broadcasting
1 Open the video capture application.
2 From the Tools menu select Options.
3 Select the Display tab.
4 Set Display Format to RGB 24 bits per pixel.
5 Optionally limit the frame rate to reduce the number of images
sent over the Internet reducing the amount of bandwidth
being used.
Depending on your requirements you may not have to change
any other display settings. See “Configuring display options”
on page 71 .
6 Select OK to save your changes.
Figure 31:Configuring the display format