Epiphan VGA2USB Pro - Manual (Page 57)

12. Windows video capture application Common procedures
User Guide Page 57
2 To resume capturing images select Pause from the Capture
menu or from the toolbar select .
To copy a snapshot of the current image
You can use the following procedure to copy the image currently
displayed by the video capture application to the video capture
workstation clipboard. You can optionally pause image capture
before copying an image.
1 Select Copy from the Edit menu or from the toolbar select .
The current image is copied to the clipboard.
2 Paste the image into a document or other application as a
bitmap image.
The image is pasted as a device independent bitmap image.
To save a snapshot of the current image as an image file
You can use the following procedure to save the current image as
a bmp, png, or jpg file on the video capture workstation. You can
optionally pause image capture before saving an image.
1 Select Save from the File menu or from the toolbar select .
The status bar shows the location and name of the saved file.
The first time you save an image the Save As dialog appears
and you can specify the file name, file type, and location of the
saved image file.
When you select Save again, the video capture application
saves the new image with the same file name and location,
overwriting the previously saved file. You can select Save As
to save the image with a different file name, file type, and
location.
You can open the saved image file with most bitmap image
editing applications.