Installing the mac os x vga2usb/dvi2usb, Drivers and application 14 – Epiphan VGA2USB Pro User Manual
Page 14
4. Installing the Mac OS X VGA2USB/DVI2USB drivers and application
Page 14
Epiphan Frame Grabber
4. Installing the Mac OS X
VGA2USB/DVI2USB drivers and
application
You must install the VGA2USB/DVI2USB software on your Mac
OS X video capture workstation before connecting the Frame
Grabber to the workstation USB port. This single download
includes the video capture application (v2u), the QuickTime
digitizer (vdig), and the VGA2USB/DVI2USB USB device driver.
To install the VGA2USB/DVI2USB drivers and application
1 Download the latest software release to your Mac OS X video
capture workstation. Browse to
to locate the Download
page for your Frame Grabber and scroll down to the
Macintosh section.
2 Download the latest version of the drivers and application that
will run on your system. Tip: Make sure you note the
download destination folder.
3 Untar the downloaded file. Tip: Double-click on the .tar file to
unpack it.
4 Double-click on the .pkg file and follow the prompts.