Daktronics All Sport 5100 Timer - Manual (Page 58)

6-4 Track Timing
Event and Heat
LCD Display Action
EVENT : EDIT
nnn
nnn
= current setting
The LCD will display the current event or heat
number. Enter the new value and press
<
ENTER >.
Setting the event number will adjust the heat
number to one.
Lane ON/OFF
These keys are used to turn their respective lanes ON or OFF. They are only active
in the Lane Mode and when the timer is running. Pressing the key will set the lane
OFF if it is ON or set it ON if it is OFF.
Lane Status
These keys cause the LCD to display the status of their respective lanes or of the
place in Non–Lane Mode. The up and down arrow keys can also be used to change
the lane number whose status is shown on the LCD.
Lane Place Order
This key changes the LCD to display the place number of Lanes 1 through 8. The
place numbers display on the LCDs bottom line. A dash (–) displays if not yet
finished, and a small "o" will display if the lane is OFF.
Edit
The key allows you to edit the time for a lane.
LCD Display Action
Time edit
lane n#
N
= lane number
Time edit
lane 1 12:34.56*
Select the number of the lane to edit and press
<
ENTER >.
When the LCD displays the lane time, the time
can be edited to the desired value. Press
<
ENTER > when done.
6.1 Menu
The
YES >, < NO >, the arrow keys, and
other allowed keys.