Daktronics All Sport 5100 Timer - Manual (Page 18)

1-10 All Sport 5100 Operation
(Continue from previous page)
LCD Display Action
Broadcast Group Setting
1- Use this setting for all single controller
systems.
The asterisk will move to the channel
setting. Use the number keys to edit this
value and press <ENTER> to accept. Edit
the channel number to the desired value
and press <ENTER> to accept.
Channel Setting
1-8 Channels that may be used with broadcast
channel 1. The channel switch on the
receiver must match this value and the
Broadcast 2 (BCAST2) jumper must be
removed.
Radio Channel Setting: Multiple Controller with Single
Broadcast Group
Typically all multi-controller systems will use Broadcast 1 and Channel 1 for the
first controller and Channels 2-8 for all remaining controllers. All radio receivers
must be set with a switch setting corresponding to the console controlling the
scoreboard and a Broadcast 1 (BCAST 1) jumper set.
If you suspect interference from a nearby Daktronics system, press <CLEAR> at the
“RADIO SETTINGS” prompt to change the channel number.
Typically all Multiple Controller systems will use channel 1 for the first controller.
All other controllers will use sequential channel settings (2-8)