Daktronics All Sport 5100 Timer - Manual (Page 23)

Transponder Interface Operation 2-3
A "QP" indicates that the console is in qualifying mode and set to show passing. The
illustration below shows car number 15 in the third position, lane 12 on lap 13 in the
race mode.
P- 3 # 15 L 12
CUR LAP 13 R
K
Note: Make sure the console is in the correct mode, Qualify or Race. The
console mode should match the mode of the timing system. In Qualify mode, the
cars are displayed in order of lap times. In Race mode, the cars are displayed in
order of race position.
2.2 Menu
The < MENU > key selects from a list of options specific to the racing sport. The up
and down arrow keys < >, < > allow the user to scroll through the menu list.
Pressing any key other than the <
YES >, < NO > or arrow keys will exit the menu
function.
K
Note: Not all prompts must be answered. The following menu functions may be
available:
New Race
When the LCD screen message appears as shown, the following actions may be
selected:
LCD Display Action
MENU-MAIN
NEW RACE? Press < YES > to clear all of the program data
for the last race or the race in progress and
begin running a new race.
Press < NO > to resume the event in progress
using the current data and to exit the menu.
Press the down arrow key < > to scroll to the
next selection.