Daktronics All Sport 5100 Timer - Manual (Page 19)

All Sport 5100 Operation 1-11
LCD Display Action
The LCD will toggle
these screens
* = current edit item
The bottom line shows
default settings.
RADIO SETTINGS
BCAST Y CHAN XX
Enter to accept
clear to modify
bcast group 1
radio chan 01
The LCD shows the current radio settings along
with a prompt to accept or modify these values.
If the radio settings are correct, press <ENTER>
If these values are incorrect, press <CLEAR>
If <CLEAR> is pressed to modify the radio
settings, the LCD at the left is shown, allowing
edit of the Channel or Broadcast group setting.
Edit the Broadcast Setting. Use the number keys
to enter the desired broadcast group and press
<ENTER> to accept.
Broadcast Group Setting
1- Use this setting for all multiple controller
with single broadcast group setups.
The asterisk will move to the channel
setting. Use the number keys to edit this
value and press <ENTER> to accept.
Edit the channel number to the desired
value and press <ENTER> to accept.
Channel Setting
1-8 Channels that may be used with broadcast
channel 1. The channel switch on the
receiver must match this value and the
Broadcast 2 (BCAST2) jumper must be
removed.
Radio Channel Setting: Multiple Controller with Multiple
Broadcast Systems
Typically all multiple controller systems will use Broadcast Group 1 Channel 1 for
the first controller in Broadcast Group 1 and Broadcast Group 2 Channel 1 for the
first controller in Broadcast Group 2. All other consoles in each group are added
sequentially, using channels 2-4.