Daktronics All Sport 5100 Timer - Manual (Page 144)

H-8 All Sport 5100
Quick Start Reference
All Sport 5100 Quick Start Reference
Multiple-Lane Photocell Timing
Note: This guide is used only with Overlay 0G-143770.
Startup
• Turn the power switch “ON.”
• At the Resume Game? Y/N prompt:
Press < ENTER /YES > to resume race where last shut off;
- or -
Press < CLEAR/NO > to enter a new code number (or start a new race
with the same code number).
Start Timer
• < START TIMER > starts the timer for the selected lane. This key is used
only as a backup or test key.
Stop Timer
• < STOP TIMER > stops the timer for the selected lane. This key is used as
a backup or test key.
Photocell Status
• < PHOTOCELLS > displays the status of all photocell inputs on the LCD.
This key can be used when aligning photocells.
Reset Timer
• < RESET TIMER > resets the timers for all lanes in Lane Timer mode and
clears the competitor number. In Water Slide Timer mode, only the lane
number selected will be reset.
Comp #
• < COMP # > sets the current competitor number for the lanes 1 through 4.
Set Best Time
• < SET BEST TIME > is used to set the Best Recorded Time value.