Daktronics All Sport 5100 Timer - Manual (Page 14)

1-6 All Sport 5100 Operation
1.8 Startup
When the LCD screen message appears as shown, the following actions may be
selected:
LCD Display Action
AS-5100 v1.4.1
ED-11544
The console performs a self-test when it is
powered on. During the self-test, a message
displays the version of the standard software
loaded in the console.
V = version number and revision number
O = standard software number
PREV CODE nnnn
RESUME GAME?
nnnn =
last code selected
When the self-test completes, a prompt
displays the code number for the last event
run. This is useful when power to the console
is lost during an event.
Press <YES> to resume the last event stored
in memory. The console is now ready for
operation.
Press <NO> to start a new event or change to
a different sport. The console will prompt for
a new code number as shown below.
SELECT CODE
CODE nnnn
nnnn = last code selected
The Select Code prompt allows you to accept
the last code selected (displayed on the second
line) or enter a new code.
To accept the code shown, press <ENTER>.
To select a new sport code:
1. Get the code number from the sport
insert or the section of the manual for
that event.
2. Use the number keys to enter the new
four-digit code. Press <ENTER>.
Radio chan nn
Enter or change
nn = last radio channel used
If a new code is selected and the radio option
is installed, the console prompts for a channel.
When Resume Game is used, the last channel
selected is used.
Press < ENTER > to accept the channel number
or enter a new channel number.