Daktronics All Sport 5100 Timer - Manual (Page 143)

All Sport 5100 H-7
Quick Start Reference
All Sport 5100 Quick Start Reference
Single-Lane Track Photocell Timing
Note: This guide is used only with Overlay 0G-139399.
Startup
• Turn the power switch “ON.”
• At the Resume Game? Y/N prompt:
Press < ENTER /YES > to resume race where last shut off;
- or -
Press < CLEAR/NO > to enter a new code number (or start a new race
with the same code number).
Photocells
• < PHOTOCELLS > displays the status of all photocell inputs on the LCD.
This key can be used when aligning photocells.
Display Time Keys
• < DISPLAY TIME > displays the race time on the scoreboard in the Current
Time/Time of Day combination digits.
• <
DISPLAY TIME OF DAY > displays the current time of day. If the time of
day has not been set previously, the console will prompt for the current time
of day setting.
Set Time
• < SET TIME > is used to set the race time. This key is disabled if the race
timer is running.
Reset
• < RESET > resets the race timer for a new competitor.
Placing
• < SET CAR POSITION > can be used to rapidly set the car numbers
corresponding to a series of race places. Enter the first place to change and
<
ENTER >, followed by the new car number for that place. Each press of the
< ENTER > key selects the next place for editing. Press < ENTER > a second
time to exit the function.
• <
1ST PLACE >, < 2ND PLACE >, (etc.) keys are used to set the car number
associated with the selected place.
• <
SWAP 1ST 2ND >, < SWAP 2ND 3RD >, (etc.) keys are used to swap the
car numbers in the places listed on the key. This key can be used when one
competitor moves ahead of another in place order.
• <
RESET ALL PLACES > resets all places to blank competitor numbers.