Daktronics All Sport 5100 Timer - Manual (Page 25)

Transponder Interface Operation 2-5
Race/Qualify Mode
LCD Display Action
CURRENT MODE?
*RACE←→QUALIFY
*
= current setting
Press the left or right arrow keys < >, < >
to select Race or Qualify mode.
The Race/ Qualify setting selects the order of
positions displayed. In Race mode, the
competitors are listed in order of current race
position. In Qualify mode, competitors are
listed in order of fastest lap time. Make sure
the console setting matches the current race
status of the controlling software
K
Note: The Race/Qualify status is shown
on the bottom line of the LCD as an "R" or
"Q."
2.3 Edit Settings
LCD Display Action
MENU- MAIN
EDIT SETTINGS? Press < YES > or the right or left arrow key
< >, < > to select the Settings submenu
and show the first prompt on the LCD.
Press < NO > to resume the event in progress
using the current data and to exit the menu.
Press the down arrow key < > to scroll to the
next selection.
K
Note: All settings pertain to the operation
of the console in transponder interface codes.
The Settings menu may be neglected if
transponders are not used.