Daktronics All Sport 5100 Timer - Manual (Page 52)

5-8 Lane Timing/Water Slide
Timing Operation
Set Hold Time
LCD Display Action
Display hold
Time ss The Hold Time sets the amount of time to
hold the timer value on the scoreboard before
an automatic reset to 0:00. The operator can
enter a maximum hold time of 99 seconds.
K
Note: Set this time to 0 to set the display
to hold the timer value until a reset or a new
photocell start.
Timing Mode
LCD Display Action
Timing mode
1 – 1st to finish
1 = 1st to Finish
2 = Best Time
Enter the desired Timing mode to select how
the lane times are ranked.
Press < 1 > < ENTER > to select 1st to Finish.
The official timer values will be ranked by
the order of finish. This is the common Start
mode.
Press < 2 > < ENTER > to select Best Time.
The official timer values will be ranked by
the best time order.
Timer Precision
LCD Display Action
Timer precision
1 – Hundredths
1 – hundredths
2 -- thousandths
At the Timer Precision selection, enter the
desired precision level for use with the timer.
Press < 1 > < ENTER > to time to 1/100th
second.
Press <
2 > < ENTER > to time to 1/1000th
second.