Daktronics All Sport 5100 Timer - Manual (Page 28)

2-8 Transponder Interface Operation
Maximum Position Displayed
LCD Display Action
MAX POSITION
DISPLAYED nn
nn
= current setting (Y/N)
This setting selects the maximum position to
be displayed in the variable-position car
number location on a numeric or fixed-digit
scoreboard.
Enter a number between 1 and 45 and press
to accept.
K
Note: Disregard this setting if your
installation does not include a display
showing variable position car numbers.
Position Display Time
LCD Display Action
POSITION DISPLAY
TIME nn
nn
= current setting (Y/N)
Enter the time (in seconds) for each position
group to be displayed on the numeric or fixed-
digit scoreboard before moving to the next
group.
K
Note: Disregard this setting if your
installation does not include a display
showing variable-position car numbers.
Restart Position Display Cycle
LCD Display Action
Restart cycle
At start pos? N*
N*= current setting (Y/N)
Press to restart the position/car number
cycle when the controller receives the position
configured as the start position.
Press to set the console for continuous
cycle.
K
Note: Disregard this setting if your
installation does not include a display
showing variable-position car numbers.