Daktronics All Sport 5100 Timer - Manual (Page 26)

2-6 Transponder Interface Operation
Blank with 1st Position
LCD Display Action
BLANK ALL WHEN
1ST POS RCVD? N*
*
= current setting (Y/N)
Press < YES > yes to blank all positions (other
than first place) when a first-place time is
received from the transponder.
All other positions will be displayed as they
cross the loop.
K
Note: This setting is NOT applicable if
the console is in Qualify mode AND set to
show passing information.
Show Passing Lap Time
LCD Display Action
SHOW PASSING LAP
TIME INFO? N*
*
= current setting (Y/N)
Press < YES > to show lap time information on
the lap time section of the scoreboard when
passing information is received from the
transponder.
K
Note: Passing information will only be
displayed if the console is in Qualify mode.
This information will be displayed in the
"Current Competitor" RTD item numbers and
on fixed-digit, or numeric, time displays. For
a more detailed explanation, refer to the All
Sport 5100 Enhanced RTD item numbers in
Appendix D.