Daktronics All Sport 5100 Timer - Manual (Page 40)

4-4 Oval and Lane Track
Photocell Timing Operation
Set Time
LCD Display Action
Set time mm:ss.tht* Press <SET TIME> to modify the time value
displayed on the scoreboard. The time
modified depends on which time is currently
displayed on the scoreboard (Running Time,
Lap Time, Best Lap Time or Time of Day).
Start Enable, Lap Enable, Stop Enable
LCD Display Action
START ENABLE?
STOP ENABLE?
LAP ENABLE?
Press < START ENABLE > and < ENTER > to
Start Enable the photocell inputs. The timer
will be started the next time the photocell
beam is broken.
Press < STOP ENABLE > and < ENTER > to
Stop Enable the photocell inputs. The timer
will be stopped the next time the photocell
beam is broken.
Press < LAP ENABLE > and < ENTER > to set
the console to record a lap time with the next
photocell beam crossing.
K
Note: Photocell inputs will only be active
when enabled for start, stop or lap. If the
photocell is not enabled for one of these
functions, a car crossing the photocell beam
will not affect the timer status. After a lap-
enabled photocell crossing, the lap time will
automatically appear on the display. To
display Running Time again, press the
<
DISPLAY RUNNING TIME > key. To display
the Best Lap Time for the current run, press
<
DISPLAY BEST LAP TIME >.
Laps
Press < LAPS
• > to edit the current lap number.
Press < LAPS +1 > and < LAPS -1 > to increment and decrement the total lap count.
Press < DISPLAY LAPS > to display the current lap on the scoreboard.