Daktronics All Sport 5100 Timer - Manual (Page 142)

H-6 All Sport 5100
Quick Start Reference
Enable Keys
• < START ENABLE > sets the console to start the race timer with the next
photocell beam cross. The LCD displays the text, “Start Enable.” The
<
START ENABLE > key is disabled when the race timer is running.
• < LAP ENABLE > sets the console to reset the lap timer and display the
time for the current lap with the next photocell beam cross. The timer will
then begin timing a new lap. The LCD displays the text, “Lap Enable.” The
<
LAP ENABLE > key is disabled when the race timer is stopped.
• < STOP ENABLE > sets the console to stop the race timer with the next
photocell beam cross.
Display Time Keys
• < DISPLAY RUNNING TIME > displays the current running time on the
scoreboard in the Current Lap Time/Black Flag/Lap Number combination
digits.
• <
DISPLAY BEST LAP TIME > displays the best lap time for the current car
(since the last reset) on the scoreboard in the Current Lap Time/Black
Flag/Lap Number combination digits.
• <
DISPLAY TIME OF DAY > displays the current time of day. If the time of
day has not been set previously, the console will prompt for the current time
of day setting.
Set Time
• < SET TIME > is used to set the current time displayed on the scoreboard
(determined by the < DISPLAY TIME > keys.) If time is not displayed on the
scoreboard, < SET TIME > sets the current race time. This key is disabled if
the scoreboard timer is running.
Reset
• < RESET > resets the race timer and best lap time value for a new
competitor.
Position
• < SET CAR POSITION > can be used to rapidly set the car numbers
corresponding to a series of race positions. Enter the first position to change
and <
ENTER >, followed by the new car number for that position. Each press
of the < ENTER > key selects the next position for editing. Press < ENTER > a
second time to exit the function.
• <
1ST PLACE >, < 2ND PLACE >, (etc.) keys are used to set the car number
associated with the selected place.
• <
SWAP 1ST 2ND >, < SWAP 2ND 3RD >, (etc.) keys are used to swap the
car numbers in the places listed on the key. This key can be used when one
car passes another.