Daktronics All Sport 5100 Timer - Manual (Page 43)

Oval and Lane Track 4-7
Photocell Timing Operation
Separate Photocell Lanes
LCD Display Action
Separate pcell
Lanes? Y/n*
*
current setting
Press < YES > to separate the two-photocell
start/stop inputs. When photocells are
separated, a stop from one lane will not stop
the opposite lane time. This setting can be
used for a two-lane track where each lane
races separately.
Press < NO > if a single-lane track setup is
used.
Press the down arrow key < > to scroll to the
next selection.
K
Note: This setting will only appear if the
operator selects Lane Track Timing mode.
Time of Day
LCD Display Action
MENU – TIME OF DAY
1*12. 2-24 HOUR Press < 1 > or < 2 > to display the Time of Day
in 12-hour (default) or 24-hour format.
Press < ENTER > or the down arrow key < >
to scroll to the next section.
MENU – TIME OF DAY
TOD HH:MM:SS
HH:MM:SS
= current setting
Enter the Time Of Day in hours, minutes and
seconds using the selected format on the
number pad, and press <
ENTER >.
Press < ENTER > or the down arrow key < >
to scroll to the next selection.