Daktronics All Sport 5100 Timer - Manual (Page 137)

All Sport 5100 H-1
Quick Start Reference
Appendix H: All Sport 5100 Quick Start
Reference
All Sport 5100 Quick Start Reference
Transponder Interface
Note: This guide is used only with Overlay 0G-139243.
Startup
• Turn the power switch “ON”
• At the Resume Game? Y/N prompt:
Press < ENTER /YES > to resume race where last shut off;
- or -
Press < CLEAR/ NO > to enter a new code number (or start a new
race with the same code number).
Status
• < RED >, < YELLOW > and < GREEN > keys are used to set the current race
status. This status will be overwritten by the status selected on the
transponder computer.
Black Flag
• < BLACK FLAG > sets the competitor number to black flag.
• < DISPLAY BLACK FLAG > flashes the current black flag competitor in the
Current Lap Time/Black Flag/Lap Number digits on the scoreboard.
Display Laps
• < DISPLAY LAPS > displays the current lap count in the Current Lap
Time/Black Flag/Lap Number combination digits on the scoreboard.
Display Time
• < DISPLAY TIME > displays the current lap time in the Current Lap
Time/Black Flag/Lap Number combination digits on the scoreboard.
Current Lap Time
• < CURRENT LAP TIME > sets or modifies the current lap time shown on the
scoreboard. This value will be overwritten by a value received from the
transponder computer.
Position
• < CURRENT POSITION > sets the current position information displayed on
the LCD. This key does not modify information shown on the scoreboard.