Daktronics All Sport 5100 Timer - Manual (Page 27)

Transponder Interface Operation 2-7
Show First Pass
LCD Display Action
SHOW FIRST
PASS? Y*
*
= current setting (Y/N)
Press <YES> to show passing information
with the first pass. Press <NO> to update the
new passing competitor with the second pass.
This setting can be used to configure the
passing display to match the qualifying track
setup. If the loop is located in such a way that
a second car crosses it while the first car is
finishing a qualifying lap, set the console to
disregard the first pass by selecting "NO."
Otherwise, if you want the display to update
on the first pass of a competitor, select "YES."
K
Note: Passing information will only be
displayed if the console is in Qualify mode.
Starting Position Displayed
LCD Display Action
START POSITION
DISPLAYED nn
nn
= current setting (Y/N)
This setting selects the starting position to be
displayed in the variable-position car number
location on a numeric or fixed-digit
scoreboard.
Enter a number between 1 and 45 and press
to accept.
K
Note: Disregard this setting if your
installation does not include a display
showing variable-position car numbers.