Daktronics All Sport 5100 Timer - Manual (Page 47)

Lane Timing/Water Slide 5-3
Timing Operation
Reset Timer (Lane Timing Mode)
LCD Display Action
Reset
Lanes? Y/n Pressing the < RESET TIMER > key will
prompt with the Reset Lanes message. Press
<
YES > to reset or < NO > to leave the timers.
K
Note: This message will only display in
Lane Timing mode.
Reset Timer (Water Slide Mode)
LCD Display Action
Reset
Select lane: 1* Pressing the < RESET TIMER > key will
prompt with the Select Lane message. Select
the lane number (1-4) and press <
ENTER > to
reset that lane.
K
Note: This message will only display in
Water Slide mode.
Timer Photocell Status
LCD Display Action
Pcell status n
Start I Stop i
N
= selected timer photocell
Pressing the < TIMER 1 PHOTOCELL
STATUS >, < TIMER 2 PHOTOCELL
STATUS >, < TIMER 3 PHOTOCELL
STATUS > or < TIMER 4 PHOTOCELL
STATUS > displays the status of the selected
timer start and stop photocell on the LCD.
The photocell status can be determined as
shown below:
LCD
Display
Photocell Status
I
Beam is aligned
0
Beam is broken
Pressing a < TIMER PHOTOCELL STATUS >
key a second time will clear the photocell
menu.