2 if connections, 1 rx if connectors, 2 tx if connectors – Comtech EF Data CDM-740 User Manual
Page 45: 3 terrestrial data connections, 1 ge-1 and ge-2 ethernet connectors, rj-45, 2 fe (fast ethernet) connector, rj-45

CDM-740 Advanced Satellite Modem
Revision 0
Rear Panel Connector Pinouts
MN-CDM740
3–3
3.2
IF Connections
There may be DC voltages present on the Type ‘N’ Rx and Tx IF connectors, up
to a maximum of 48 volts.
3.2.1
Rx IF Connectors
Ref Des
Connector
Type
Description
Direction
L-BAND IN 1
Type ‘F’
Rx IF signal, L- Band
In
L-BAND IN 2
Type ‘N’
(UNUSED) (UNUSED)
3.2.2
Tx IF Connectors
3.3
Terrestrial Data Connections
3.3.1
GE-1 and GE-2 Ethernet Connectors, RJ-45
These are two standard RJ-45 female modular jacks, operating at 10/100/1000
Mbps, half and full duplex, auto-negotiating.
Note: The maximum Ethernet packet size is 1522 bytes (including Ethernet
headers and CRC).
3.3.2
FE (Fast Ethernet) Connector, RJ-45
This is a standard RJ-45 female modular jack, operating at 10/100 Mbps, half and full
duplex, auto-negotiating.
Note: The maximum Ethernet packet size is 1522 bytes (including Ethernet headers
and CRC).
Ref Des
Connector
Type
Description
Direction
L-BAND OUT
Type ‘N’
Tx IF signal, L- Band
Out
IF OUT
BNC
Tx IF signal,
70/140 MHz band
L-BAND MON
Type ‘F’
L-Band Monitor of
70/140 or L-Band
CA UTIO N