Comtech EF Data CDM-740 - Manual (Page 133)

CDM-740 Advanced Satellite Modem Revision 0
Remote Control MN-CDM740
A–19
A.5.4 Bulk Configuration Strings
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
Configuration
Load CLD= 1 byte, value of
0 thru 9 Command only.
Retrieves a previously stored modem configuration from Configuration
Memory location defined by the one-byte argument (0 to 9).
Example: CLD=4 (load modem configuration from location 4 to be the
active configuration)
CLD=
CLD?
CLD*
CLD# N/A N/A
Configuration
Save CST= 1 byte, value of
0 thru 9 Command only.
Stores the current modem configuration in Configuration Memory location
defined by the one-byte argument (0 to 9).
Example: CST=0 (store the current configuration in location 0)
CST=
CST?
CST*
CST# N/A N/A
A.5.5 Modem Information
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response
to
Command
Query
(Instruction &
Qualifier)
Response to Query
Firmware
information N/A 100 bytes Query only.
Returns firmware information for Image 0, 1 or 2, where:
0 = Bootrom Information
1 = Image #1 Firmware Information
2 = Image #2 Firmware Information
Example: FRW=1
Fw/12864-,1.1.1,04/01/07
N/A FRW?0
FRW?1
FRW?2
FRW=xxx…xxx
(see Description of
Arguments)
Serial Number N/A 9 bytes
Query only.
Returns the CDM-740’s 9-digit serial number.
Example: SNO=176500143
N/A SNO? SNO=xxxxxxxxx
(see Description of
Arguments)
Software
Revision N/A 8 bytes Query only.
Returns the value of the internal software revision installed in the unit,
in the form of xx.xx.xx
Example: SWR=1.0.3
N/A SWR? SWR=xx.xx.xx
(see description
of Arguments)