Comtech EF Data CDM-740 - Manual (Page 132)

CDM-740 Advanced Satellite Modem Revision 0
Remote Control MN-CDM740
A–18
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
SNMP
System
Location SSL= 254 bytes,
characters,
Command or Query.
SNMP System Location string
Example: <1/SSL=Upstairs back right
If not configured it returns empty string: <1/SSL=
SSL =
SSL! SSL? SSL =x [1..254]
(see Description of
Arguments)
SNMP
Unit Name SSN= 16 bytes,
characters,
Command or Query.
SNMP System Name string
Example: <1/SSN=Remote1.
If not configured it returns empty string: <1/SSC=
SSN =
SSN! SSN? SSN =x [1..16]
(see Description of
Arguments)
SNMP Trap
Destination IP
Address STA= 15 bytes,
Numerical
Command or Query.
Sets or returns the IP address of the SNMP Trap destination IP Address
where traps are sent, in the form xxx.xxx.xxx.xxx where:
xxx.xxx.xxx.xxx is the IP addresss
Example: <1/STA=010.006.030.001
Returns >0001/STA=0.0.0.0 when not configured.
STA =
STA! STA? STA = xx.xxx.xxx.xxx
(see Description of
Arguments)
SNMP
Write
Community SWC= 16 bytes,
characters, no
spaces
Command or Query.
SNMP write community string. Empty string is not allowed
Example: <1/SWC =public
SWC =
SWC! SWC? SWC =x
(see Description of
Arguments)
Tx BERT
Pattern TBP= 1 byte Command or Query.
Tx BERT Pattern, where:
0=2^23-1 (default)
1=2047
Example: TBP=1 (Tx BERT Pattern is 2047)
TBP=
TBP?
TBP# TBP? TBP=x
(see Description of
Arguments)
Modem Time TIM= 6 bytes Command or Query.
A time in the form hhmmss, indicating the time from midnight, where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours,12 minutes, 59 seconds)
TIM=
TIM?
TIM*
TIM# TIM? TIM=hhmmss
(see Description of
Arguments)
Unit Test
Mode TST= 1 byte, value of
0 thru 2 Command or Query.
Unit Test Mode, where:
0=Normal Mode (no test)
1=Tx CW
2=Tx Alternating 1,0 Pattern
Example: TST=1 (Tx CW)
TST=
TST?
TST*
TST# TST? TST=x
(see Description of
Arguments)