19 exiting snmp configuration -44, 20 logging on -44, 21 changing the logon password -44 – Comtech EF Data MM200 User Manual
Page 68: 19 exiting snmp configuration, 20 logging on, 21 changing the logon password
User Interfaces
MM200 High-Speed Microwave Modem
4-44
TM086 - Rev. 4.1
Security User
Logon Password
Authentication
Password
Privacy Password
Initial
Viewer
Viewer
Viewer
Oper–md5
Oper
Oper
Oper
Viewer–sha
Viewer
Viewer
Oper-sha
Oper
Oper
Oper
Note: All entries are case sensitive
4.19 Exiting SNMP Configuration
1.
Select the Main Menu by pressing ‘1’ followed by
level menu screen.
4.20 Logging On
1.
The user must be logged on to have access to SNMP Features. To log on the SNMP
configuration, press ‘13’ followed by
+------------------| Logon |------------------+
|
|
|
1.User ID
:
|
|
2.Password
:
|
|
|
|
3.OK
4.CANCEL
|
|
|
+-----------------------------------------------+
2.
In the User ID Text Box, enter “Oper-md5” (case sensitive).
3.
In the Password Text Box, enter “Oper” (case sensitive).
4.
Select OK
4.21 Changing the Logon Password
To change the password, logged on so that the “SNMP/Security” selection appears. Once logged
on, proceed to the “SECURITY CONTROLS” Menu Selections by pressing ‘12’. Press ‘12’ again
followed by
+---------| Change Password |-----------+
|
|
|
1.Old Password
:
|
|
2.New Password
:
|
|
3.Re-enter New Password :
|
|
|
|
4.OK 5.CANCEL
|
|
|
+-----------------------------------------------+
1.
In the Old Password Text Box, enter “Oper” (case sensitive).