Comtech EF Data MM200 - Manual (Page 133)

MM200 High-Speed Microwave Modem Appendix A
TM086 – Rev. 4.1 A-33
Bit 5 - 7 = Spare
Opcode: <0x2162>
Query selected Rx interface configuration and status
Command Data Field 1 Byte
<1> Selected interface
number 0 = interface1
1 = interface2
2 = interface3
3 = interface4
Query Response
<1>
<1>
<4>
<4>
<1>
<1>
Selected
interface number
Number of
nonvol bytes*
* M&C developers
MUST use this
number of nonvolatile
bytes to index into the
selected interface
status area. The
nonvolatile data might
grow with future
firmware revisions.
Refer to discussion
on forward/backward
compatibility.
Interface PID
Interface Data
Rate
Interface Control
Interface Type
0 = interface1
1 = interface2
2 = interface3
3 = interface4
Number of nonvol bytes for selected interface
0 - 8192
1000000 - 50000000
0 = Disable, 1 = Enable
0 = ASI
1 = AASI
2 = T3 DS3
3 = E3
4 = STS1
5 = T1 DS1
6 = E1
7 = DS0x8
8 = DS0x7+A
9 = Par DVB
10 = Par M2P
11 = OC3
12 = STM1
13 = HSSI
14 = SMPTE 19
15 = SMPTE 38
16 = P 10BaseT
17 = E2 UNBAL
18 = T2 UNBAL
19 = T2 BAL