Comtech EF Data MM200 - Manual (Page 161)

MM200 High-Speed Microwave Modem Appendix B
TM086 – Rev 4.1 B-13
::= { radMM200TxInterfaceNVStatusEntry 11 }
radMM200TxInterfacePRBS OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
ones(2),
pat001(3),
prbs2047(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the pseudo-random bit sequence for Tx
interface link testing. Not yet implemented."
::= { radMM200TxInterfaceNVStatusEntry 12 }
radMM200TxInterfaceMajorAlarmMask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Major Alarm mask:
Bit 0 = Interface test
Bit 1-7 = Spares
0 = Mask, 1 = Allow"
::= { radMM200TxInterfaceNVStatusEntry 13 }
radMM200TxInterfaceMinorAlarmMask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minor Alarm mask:
Bit 0 = Interface FIFO full
Bit 1 = Interface FIFO empty
Bit 2 = Interface PLL lock
Bit 3 = Interface data activity detect
Bit 4 = Interface clock activity detect
Bit 5 = Interface Tx input framing valid, added for AASI
Bit 6 = Interface signal loss, valid for some interfaces
Bit 7 = Spares
0 = Mask, 1 = Allow"
::= { radMM200TxInterfaceNVStatusEntry 14 }
radMM200TxInterfaceJitterControl OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
stamp2(2),
stamp3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the jitter control"
::= { radMM200TxInterfaceNVStatusEntry 15 }
-- ---------------------------------------------------------------------------------------------------------------------
-- ---------------------------------------------------------------------------------------------------------------------
-- MM200 modulator interface volatile status information.
radMM200TxInterfaceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadMM200TxInterfaceStatusEntry
MAX-ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"MM200 Tx interface volatile status Table"
::= { mm200MIBObjects 6 }