Comtech EF Data MM200 - Manual (Page 169)

MM200 High-Speed Microwave Modem Appendix B
TM086 – Rev 4.1 B-21
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregate input level in dBm. Signed implied
decimal point.
(i.e. -265 mean -26.5dBm)"
::= { radMM200DemodStatus 12 }
-- --------------------------------------------------------------------------------------------------------------------
-- --------------------------------------------------------------------------------------------------------------------
-- MM200 demodulator channel non-volatile status information.
radMM200RxChannelNVStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadMM200RxChannelNVStatusEntry
MAX-ACCESS
not-accessible
STATUS mandatory
DESCRIPTION
"MM200 Rx channel non-volatile status Table"
::= { mm200MIBObjects 9 }
radMM200RxChannelNVStatusEntry OBJECT-TYPE
SYNTAX RadMM200RxChannelNVStatusEntry
MAX-ACCESS
not-accessible
STATUS current
DESCRIPTION
"MM200 Rx channel non-volatile status structure"
INDEX { radMM200RxChannelNVIndex }
::= { radMM200RxChannelNVStatusTable 1 }
RadMM200RxChannelNVStatusEntry ::=
SEQUENCE
{
radMM200RxChannelNVIndex INTEGER,
radMM200RxChannelMajorAlarmMask INTEGER,
radMM200RxChannelMinorAlarmMask INTEGER
}
radMM200RxChannelNVIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS
read-only
STATUS current
DESCRIPTION
"Index into the MM200 Rx channel non-volatile table."
::= { radMM200RxChannelNVStatusEntry 1 }
radMM200RxChannelMajorAlarmMask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS
read-write
STATUS current
DESCRIPTION
"Major Alarm mask:
Bit 0 = Demod daughter board FPGA status
Bit 1 = RF PLL lock detect status
Bit 2-7 = Spares
0 = Mask, 1 = Allow"
::= { radMM200RxChannelNVStatusEntry 2 }
radMM200RxChannelMinorAlarmMask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS
read-write
STATUS current
DESCRIPTION
"Minor Alarm mask:
Bit 0 = QAM lock status
Bit 1 = FEC lock status
Bit 2 = FIFO full status
Bit 3 = FIFO empty status
Bit 4 = Sync lock status