Comtech EF Data MM200 - Manual (Page 176)

Appendix B MM200 High-Speed Microwave Modem
B-28 TM086 – Rev. 4.1
Bit 0 = Interface FIFO full
Bit 1 = Interface FIFO empty
Bit 2 = Interface PLL lock
Bit 3 = Interface data activity detect
Bit 4 = Interface clock activity detect
Bit 5 = Interface Tx input framing valid, added for AASI
Bit 6 = Interface signal loss, valid for some interfaces
Bit 7 = Spare
0 = Mask, 1 = Allow"
::= { radMM200RxInterfaceNVStatusEntry 16 }
radMM200RxInterfaceJitterControl OBJECT-TYPE
SYNTAX INTEGER {
inch(1),
slow(2),
medium(3),
fast(4),
stamp2(5),
stamp3(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the jitter control"
::= { radMM200RxInterfaceNVStatusEntry 17 }
radMM200RxInterfaceByteGapping OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS
read-write
STATUS current
DESCRIPTION
"Selects the jitter control"
::= { radMM200RxInterfaceNVStatusEntry 18 }
-- --------------------------------------------------------------------------------------------------------------------
-- --------------------------------------------------------------------------------------------------------------------
-- MM200 demodulator interface volatile status information.
radMM200RxInterfaceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadMM200RxInterfaceStatusEntry
MAX-ACCESS
not-accessible
STATUS mandatory
DESCRIPTION
"MM200 Rx interface volatile status Table"
::= { mm200MIBObjects 12 }
radMM200RxInterfaceStatusEntry OBJECT-TYPE
SYNTAX RadMM200RxInterfaceStatusEntry
MAX-ACCESS
not-accessible
STATUS current
DESCRIPTION
"MM200 Rx interface volatile status structure"
INDEX { radMM200RxInterfaceIndex }
::= { radMM200RxInterfaceStatusTable 1 }
RadMM200RxInterfaceStatusEntry ::=
SEQUENCE
{
radMM200RxInterfaceIndex INTEGER,
radMM200RxInterfaceMajorAlarmStatus INTEGER,
radMM200RxInterfaceMinorAlarmStatus INTEGER,
radMM200RxInterfaceLatchedMajorAlarmStatus INTEGER,
radMM200RxInterfaceLatchedMinorAlarmStatus INTEGER,
radMM200RxInterfaceCard INTEGER
}
radMM200RxInterfaceIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)