Comtech EF Data MM200 - Manual (Page 155)

MM200 High-Speed Microwave Modem Appendix B
TM086 – Rev 4.1 B-7
Bit 7 = Spare
0 = Pass, 1 = Fail"
::= { radMM200ModStatus 7 }
radMM200TxLatchedMinorAlarm2Status OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to
the value '00000000'B.
Bit 0..7 = Spares
0 = Pass, 1 = Fail"
::= { radMM200ModStatus 8 }
radMM200TxCarrierStatus OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows status of the carrier, on or off"
::= { radMM200ModStatus 9 }
radMM200TxMaxPayload OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum payload at current modulation."
::= { radMM200ModStatus 10 }
radMM200TxPercentUtilization OBJECT-TYPE
SYNTAX INTEGER (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"% utilization, implied decimal point.(i.e. 7985 means 79.85%"
::= { radMM200ModStatus 11 }
radMM200TxBandwidth OBJECT-TYPE
SYNTAX INTEGER (0..40000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current bandwidth usage."
::= { radMM200ModStatus 12 }
-- -------------------------------------------------------------------------------------------------------------------
-- -------------------------------------------------------------------------------------------------------------------
-- MM200 modulator channel non-volatile status information.
radMM200TxChannelNVStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadMM200TxChannelNVStatusEntry
MAX-ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"MM200 Tx channel non-volatile status Table"
::= { mm200MIBObjects 3 }
radMM200TxChannelNVStatusEntry OBJECT-TYPE
SYNTAX RadMM200TxChannelNVStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION