Comtech EF Data MM200 - Manual (Page 32)

User Interfaces MM200 High-Speed Microwave Modem
4-8 TM086 - Rev. 4.1
MONITOR (menu):
MUX STATUS
FIFO A STATUS
FIFO B STATUS
CHANNEL A ERR
CHANNEL B ERR
CHANNEL AB ERR
Controls the diversity mode.
Diversity channel and FIFO status.
{Unused, Channel A, Channel B, Null
Frames}
Specifies the multiplexer status.
{No Flags, Empty, Full}
Specifies the status of FIFO A.
{No Flags, Empty, Full}
Specifies the status of FIFO B.
Displays the Channel A error counter.
Displays the Channel B error counter.
Displays the Channel A and B error
counter.
RW
RW
RW
RO
RO
RO
4.3.4 REPEATER (Menu)
The primary Repeater screen is listed below:
Screen Name Selections and Descriptions L2
MODE {Off, On}
Enables the repeater feature. RW
4.3.4 APC (Menu)
The primary APC screen is listed below:
Screen Name Selections and Descriptions L2
TRANSMIT (menu):
XMT CONTROL
MAX TX LEVEL
MIN TX LEVEL
DEF TX LEVEL
STEP SIZE
APC RANGE
APC SPEED
APC Transmit settings.
{TXDOWN, TXUP, AUTO}
Controls the local TX level.
Sets the maximum TX power level.
Shows the minimum TX power level.
Sets the default TX power level.
Sets the TX power step size.
Sets the power level range.
Sets the TX power step speed.
RW
RW
RO
RW
RW
RW
RW