Comtech EF Data MM200 - Manual (Page 160)

Appendix B MM200 High-Speed Microwave Modem
B-12 TM086 – Rev. 4.1
smpt19(15)
smpt38(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the Tx interface type."
::= { radMM200TxInterfaceNVStatusEntry 5 }
radMM200TxInterfaceSubType OBJECT-TYPE
SYNTAX INTEGER {
spare(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the Tx interface sub-type."
::= { radMM200TxInterfaceNVStatusEntry 6 }
radMM200TxInterfaceFraming OBJECT-TYPE
SYNTAX INTEGER {
unframed(1),
mpeg188(2),
mpeg204(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects Unframed (184 Byte proprietary packet),
MPEG Sync Byte and MPEG Sync Byte plus ReedSolomon."
::= { radMM200TxInterfaceNVStatusEntry 7 }
radMM200TxInterfaceVolume OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the volume on the audio channel on the DS0
interfaces"
::= { radMM200TxInterfaceNVStatusEntry 8 }
radMM200TxInterfaceClockPolarity OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
inverted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects clock polarity for Tx terrestrial clock
relative to Tx data."
::= { radMM200TxInterfaceNVStatusEntry 9 }
radMM200TxInterfaceDataInvert OBJECT-TYPE
SYNTAX InversionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects data polarity"
::= { radMM200TxInterfaceNVStatusEntry 10 }
radMM200TxInterfaceBasebandLoopback OBJECT-TYPE
SYNTAX ControlType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables Tx Interface Baseband Loopback."