Comtech EF Data MM200 - Manual (Page 165)

MM200 High-Speed Microwave Modem Appendix B
TM086 – Rev 4.1 B-17
::= { radMM200DemodNVStatus 10 }
radMM200RxChannelSetting OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
oneChannel(2),
twoChannel(3),
threeChannel(4),
fourChannel(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the total number of channels in the MM200.
Automatic selection allows the MM200 to use the
maximum number of channels."
::= { radMM200DemodNVStatus 11 }
radMM200RxMajorAlarm1Mask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Major Alarm 1 mask:
Bit 0 = Glue logic FPGA status
Bit 1 = Data FPGA status
Bit 2 = Signal lock detect
Bit 3 = Sync lock detect
Bit 4 = Data PLL lock detect
Bit 5-7 = Spares
0 = Mask, 1 = Allow"
::= { radMM200DemodNVStatus 12 }
radMM200RxMajorAlarm2Mask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Major Alarm 2 mask:
Bit 0-7 = Spares
0 = Mask, 1 = Allow"
::= { radMM200DemodNVStatus 13 }
radMM200RxMinorAlarm1Mask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minor Alarm 1 mask:
Bit 0 = Spare
Bit 1 = Spare
Bit 2 = Spare
Bit 3 = Spare
Bit 4 = Spare
Bit 5 = Spare
Bit 6 = Spare
Bit 7 = Spare
0 = Mask, 1 = Allow"
::= { radMM200DemodNVStatus 14 }
radMM200RxMinorAlarm2Mask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minor Alarm 2 mask:
Bit 0..7 = Spares