Amplifier configuration, Basic amplifier connection – ATEIS IDA8C User Manual
Page 62
Ateis Studio
62
© 2012 ATEÏS
Device
Connection Max. Num
Function
Box
IDA8, use it, Deskpad can working without physcial connection.
4.1.5 Amplifier Configuration
4.1.5.1 Basic Amplifier Connection
Basic Amplifier Connection
IDA8 System apply a flexible amplifier setup , the figure above is the basic setup of amplifier with IDA8.
The figure show the connection between amplifiers and IDA8C. There two kinds of connections for
amplifier:
Normal Amplifiers Connection
The connection of amplifiers for speaker zone outputs. In above figure(Basic Amplifier Connection),
Z1~Z8 are normal amplifiers. Follow the wires, audio signal start from amplifier zone outputs goes
into amplifier's input, then gained by amplifier and input to AMPO connector of
. For
each channel of amplifier zone outputs should connect to it's correspond channel of speaker zone
output's AMPO connector. For example, amplifier zone output 5 should connect to zone5 AMPO
connector of speaker zone outputs, see the below figure.