ATEIS IDA8C - Manual (Page 57)

Product Features 57
© 2012 ATEÏS
To show fault status of zone. This LED light on if one of following faults is detected:
Normal AMP Error
Line Speaker Error
Backup AMP Error
AMP Line Leakage Error
4.1.4.3 Rear Panel
Speaker Zone Outputs
There are 8 zones for speaker & amplifier connection. each zone consists of following connectors
(from left to right):
connector of line speaker
connector of 100V audio coming from amplifier.
Backup Amplifier I/Os
Two backup amplifier connectors included 0 dB to amplifiers and 100V return from amplifiers.
Amplifier Zone Outputs
8 Zone 0dB output to amplifiers.
Bypass Mode Outputs
This port to share the bypass mode microphone signals through the IDA8C-IDA8S network(only
needed when using fiber optic network).
PDC(Peripherals Device Controller) Connectors
Two RJ-45 connectors to connect consoles or peripheral devices. For examples, PSS AS, URC
AS, PPM AS, ... are connect to IDA8S via this connector.
Local Ateis Net Connectors
Optional card to build a local dedicated IDA8C-IDA8S network.
Configurable Audio I/Os
Two configurable 0dB audio I/O port A and B. Each port is available to assemble an audio card.
There are 4 channels on each audio I/O card.
Contact Outputs