ATEIS IDA8C - Manual (Page 120)

Ateis Studio 120
© 2012 ATEÏS
15.Backup Amplifier Output
There are two backup amplifier outputs on RU-MAIN, each output consist of three connectors:
P_AMPO: Connect to backup amplifier output of primary audio processor.
AMPO: Connect to backup amplifier output.
S_AMPO: Connect to backup amplifier output of secondary audio processor.
16.Backup Amplifier Input
There are two backupt amplifier inputs on RU-MAIN, each input consist of three connectors, where N
is the number of channel:
P_BKP N: Connect to backup amplifier input of primary audio processor.
BKP N: Connect to input of backup amplifier.
S_BKP N: Connect to backup amplifier input of secondary audio processor.
4.2.1.4 RU-PDC
4.2.1.4.1 Overview
RU-PDC is a device for audio processor redundancy, the peripherals are connected with RU-PDC not
directly to audio processor. RU-PDC is in charge of switching primary and secondary audio processor to