ATEIS IDA8C - Manual (Page 212)

Ateis Studio 212
© 2012 ATEÏS
In addition you will find a comprehensive selection of tools for system design and programming using our
Ateis Studio integrated software platform for all remote-controllable devices and systems.
As you can have a huge system, the software provides a lot of function making the navigation inside the
system easier by using different layers of the design, freely configurable.
After the determination of the devices included in your system, you can start designing the internal
signal paths independently for each device, with all the exiting features the huge component library
offers, simply by drag and drop and connect different audio component.
This all is done in a straight forward and clear manner, helping you to concentrate on creating state-of-
the-art electro-acoustic environments.
This software allows management of all devices in the network from one computer. That means from one
computer and in one software interface you are able to update all the devices, to modify the configuration
and to store it into each devices independently, and of course to check and update them.
After that the design is successfully compiled and loaded into the machine(s), you have full access to all
the parameters in the system.
There are a lot of controlling features starting from simple TTL I/O's over analogue voltage control to
advanced data communication. You can choose from a range of controlling devices or remote
microphones suitable to access parameters within the whole networked system.
5.1.2 System Requirement
Ateïs Studio runs on window XP, Vista and Seven.
We recommend at least 1GB RAM, 2GHz processor.
Disk Space required is 100MB.