ATEIS IDA8C - Manual (Page 337)

Components of Audio Processor 337
© 2012 ATEÏS
Element Description
Bypass
Bypass the feedback’s module.
By clicking on Bypass you will erase the captured values.
Hold
When a Larsen is detected and a frequency locked the component hold this setting.
Manual
To enable the Frequency, Bandwidth and Gain fader to be used manually. Unable the automatic
detection.
Frequency
Frequency of the notch filter to attenuate the feedback.
Bandwidth
Bandwidth of the notch filter to attenuate the feedback.
Gain
Attenuation of the locked frequency.
Lock
Shows if the feedback killers channel has detected and is erased a frequency responsible of a
feedback.
Frequency Level
Show the frequency locked.
Bandwidth Level
Show the bandwidth of the notch filter locked.
Gain Level
Show the attenuation of the frequency locked.
Bypass All
Bypass all channels, todo
Manual All
Active manual settings (with Frequency, Bandwidth and gain knobs).
Hold All
Hold all channels, todo behavior description.
Stop Detect
todo
Reset All