Peripherals, 3rd party control – ATEIS IDA8C User Manual
Page 39

Product Features
39
© 2012 ATEÏS
4.1.1.5 Peripherals
Following table is the peripherals supported by IDA8C:
Device
Connection Max. Num
Function
Fireman MICFireman MIC
Input
1
Paging where operator is close to IDA8C.
PPM AS
PDC
31/PDC
Remote console for with paging ability.
PSS AS
PDC
1/PDC
Remote console for Paging, Event Triggering(Element Control,
Master/Sub Preset Control).
URC AS
PDC
1/PDC
Remote console for Master/Sub Preset Controlling, Element
Controlling.
URGP
PDC
1/PDC
Evacuation Input extension.
DNM
PDC
1/PDC
Auto noise gain for audio signals.
PPM-IT5
Ethernet
1 Active
Over Eth
Paging, Element Control, Master/Sub Preset Control.
URC200
TPC
Ethernet
Eth. Limit
Parameters Control, Master/Sub Preset Control.
CD8
PDC
31/PDC
Wall mounted cabinet remote paging console with 8 buttons/
zones.
CD16
PDC
31/PDC
Wall mounted cabinet remote paging console with 16 buttons/
zones.
CD Touch
PDC
1/PDC
Wall mounted cabinet remote paging console with touch screen
and Fireman Microphone.
PCP
PDC
31/PDC
Wall mounted cabinet remote paging console with telephone
styled microphone.
CDPA
PDC
31/PDC
Wall mounted cabinet remote paging console with 24 buttons/
zones and 2 extra selectable microphone sources.
PSC
PDC
31/PDC
A grouped console is comprised of a pad with monitoring
speaker, a pad with a gooseneck and 8 buttons/zones, two pads
with 8 buttons/zones.
Deskpad
PDC
1/PDC
A remote dialer for making telephone calls via IDA8's telephone
hardware.
Deskpad
Box
PDC
1/PDC
It's a RF transceiver to communication between Deskpad and
IDA8, use it, Deskpad can working without physcial connection.
Notes:
Eth. Limit: The maximum numbers of IP that can be assigned over the network.
4.1.1.6 3rd Party Control
The following table list 3rd Party Control protocols IDA8C Supported.
Protocol
Interface
Function
Connection
Settings
Ateis 3rd
Party
Protocol
Ethernet(UDP)
UDP Port =
19761
Read/Write value of parameters.
Stepped adjustment for parameters.
Modbus
Ethernet(TCP)
PDC(RS485)
TCP Port = 502
PDC Port 1~ 4
Level control
Paging