ATEIS IDA8C User Manual

Page 424

Ateis Studio

424

Evac

Enable this option to set the paging source is an evacuation source. If an evacuation source is

active on paging, A evacuation paging situation is recognized by IDA8 system, and device

shows this state on front panel LED GLOBAL EVAC. Also this activity will be logged.

Modbus Type

Set the type information of paging source for 3rd party controller which use modbus protocol to

get date from Ateis devices.
Note:

This setting is only a label, not affect behavior of Paging Component.

Modbus Channel

Set the channel information of paging source for 3rd party controller which use modbus protocol

to get date from Ateis devices.
Note:

This setting is only a label, not affect behavior of Paging Component.

Activation

Click the button on grid to open window for detail settings:

This manual is related to the following products: