Rear panel – ATEIS IDA8C User Manual
Page 50
Ateis Studio
50
© 2012 ATEÏS
Line B Error
Backup AMP Error
AMP Line Leakage Error
4.1.3.3 Rear Panel
Backup Amplifier Output
This connector connects to the output of the backup amplifier for receiving the 100V audio signal
powered by the amplifier.
Bypass Mode Outputs
This port to share the bypass mode microphone signals through the IDA8C-IDA8S network(only
needed when using fiber optic network).
PDC (Peripherals Device Controller) Connectors
Two RJ-45 connectors to connect consoles or peripheral devices. For examples, PSS AS, URC
AS, PPM AS, ... are connect to IDA8SAB via this connector.
Local Ateis Net Connectors
Optional card to build a local dedicated IDA8C-IDA8S network.
Zone1 Speaker Line Output
This connector connects to the loudspeaker of zone1.
Zone1 Amplifier Output
This connector connects to the output of the zone1 amplifier for receiving the 100V audio signal
powered by the amplifier.
Zone1 Amplifier Input
This connector connects to the input of the zone1 amplifier for transmitting 0dB audio signal to the
amplifier.
Backup Amplifier Input
This connector connects to the input of the backup amplifier for transmitting 0dB audio signal to the