ATEIS IDA8C - Manual (Page 230)

Ateis Studio 230
© 2012 ATEÏS
Right Angle
Select Right Angle if you want to draw the wire only with right angles (90 degrees).
Auto Corner
Select Auto Corner if you want that the wires are automatically arranged to have proper corner,
with separated wires and with right angles.
Signal Path Mode
Signal Path Disable
Disable the signal path highlighting function. When it's not disabled, the signal path function
allows seeing where an audio signal is sent through the design. The signal path is highlighted in
red. To understand what this function is, please see the next chapters.
Signal Path Mouse Move
In this mode, by placing the mouse on a signal link, the signal link and the entire signal path
linked will be highlighted in red.
In this example the input C1 is routed in the matrix to the output 1 and 2. If you place the mouse
on the link of the channel 1, then the signal path on the output 1 and 2 will be displayed in red.