ATEIS IDA8C - Manual (Page 61)

Product Features 61
© 2012 ATEÏS
0°C ~ 40°C
4.1.4.5 3rd Party Control
The following table list 3rd Party Control protocols IDA8C Supported.
Protocol
Interface
Function
Connection Settings
Ateis 3rd
Party
Protocol
Ethernet(UDP)
UDP Port =
19761
Read/Write value of parameters.
Stepped adjustment for parameters.
Modbus PDC(RS485) PDC Port 1~ 2
Level control
Paging
Read Monitoring Status
Read Evacuation Status
Play Message
Logic I/O Control
4.1.4.6 Peripherals
Following table is the peripherals supported by IDA8S:
Device Connection Max. Num Function
Fireman MICFireman MIC
Input
1 Paging where operator is close to IDA8C.
PPM AS PDC 31/PDC Remote console for with paging ability.
PSS AS PDC 1/PDC
Remote console for Paging, Event Triggering(Element Control,
Master/Sub Preset Control).
URC AS PDC 1/PDC
Remote console for Master/Sub Preset Controlling, Element
Controlling.
URGP PDC 1/PDC Evacuation Input extension.
DNM PDC 1/PDC Auto noise gain for audio signals.
PPM-IT5 Ethernet
1 Active
Over Eth
Paging, Element Control, Master/Sub Preset Control.
URC200
TPC
Ethernet Eth. Limit Parameters Control, Master/Sub Preset Control.
CD8 PDC 31/PDC
Wall mounted cabinet remote paging console with 8 buttons/
zones.
CD16 PDC 31/PDC
Wall mounted cabinet remote paging console with 16 buttons/
zones.
CD Touch PDC 1/PDC
Wall mounted cabinet remote paging console with touch screen
and Fireman Microphone.
PCP PDC 31/PDC
Wall mounted cabinet remote paging console with telephone
styled microphone.
CDPA PDC 31/PDC
Wall mounted cabinet remote paging console with 24 buttons/
zones and 2 extra selectable microphone sources.
PSC PDC 31/PDC
A grouped console is comprised of a pad with monitoring
speaker, a pad with a gooseneck and 8 buttons/zones, two pads
with 8 buttons/zones.
Deskpad PDC 1/PDC
A remote dialer for making telephone calls via IDA8's telephone
hardware.
Deskpad PDC 1/PDC It's a RF transceiver to communication between Deskpad and