ATEIS IDA8C - Manual (Page 143)

Product Features 143
© 2012 ATEÏS
Plug-in" make audio processor to recognize the peripheral devices.
5. Power LED
This LED light up when the PPM AS is powered on.
6. Hold LED
These LEDs Indicate which keys are selected.
7. Event Select Key
These buttons are used to select keys, each key may link to an event for triggering actions like
paging or adjust the value of parameters.
8. All/Release LED
This indicator lights up if all keys are selected.
9. All/Release Button
This button is used to select or deselect all keys.
10.Talk Key
Push this key to request paging.
11.Talk Indicator
This LED light up if PCP is allowed to paging, on the other word, the paging request has been
acknowledged.
Sometime after paging request is granted, zones under paging still can be occupied by other
sources. In such a case, the talk led still light up, but you can check busy LED to know the
situation.
12.Busy LED
Show the status of zone:
Color Status Frequency Activity
Red Permanent Priority of the zone is lower than other sources.
Green Blinking ° ° Priority of the zone is higher than other sources.
Green Permanent
The zone only desired for paging is not using by other
sources.
4.2.3.3 Characteristics
Case
Dimension = 105mm (W) x 190mm (L) x 50mm (H).
Weight = 0.7Kg.
Color = RAL7035.
Goose-neck length with microphone = 300 mm
Power
Item Voltage Current Consumption Comment