ATEIS IDA8C - Manual (Page 170)

Ateis Studio 170
© 2012 ATEÏS
4.2.7.2 Control Panel
1. Fireman Microphone Hook
An U-shape hook to place fireman microphone.
2. Microphone
Not used.
3. Power Indicator
This LED light up when the CD-Touch is powered on.
4. Fault Indicator
To display fault status of system. Following table list the states of fault:
Status Frequency Activity
Permanent There are faults in audio processor.
Blinking ° ° Lost communication with audio processor.
5. Evacuation Indicator
Light up when system is under evacuation paging.
6. Monitoring Speaker
This embedded speaker to play chime when paging or monitor signal from audio processor, it needs
to work with rs485 output component to get audio signal from other DSP components in audio
processor.
7. Fireman Microphone Connector
DIN Connector for fireman microphone connection.
8. Left Button