ATEIS IDA8C - Manual (Page 265)

System Functionality 265
© 2012 ATEÏS
If you already known the IP address of a device, you can search it by that address.
Select the [Device Management] tab or open it through the menu [View > Device Management] to open
Device Management window.
5.4.2 Read Version
To know which versions are loaded in the devices and which version are available with the current Ateïs
Studio software:
1. Open Device Management Window.
2. Search and Connect to the device.
3. Click [Read Version] to open Version window.
Click [Read] button to get version data from the device.
Firmware Unit
The firmware program unit in the device.
Compatible Version
Displays the version required by the installed software.
Current Version
Displays the firmware version of the device.
5.4.3 Update Firmware
The purpose of update firmware is to match the version contained in your Ateïs Studio software with the
version contained in the hardware of the devices.
Read version to know if there is versions mismatching. Then, if needed, proceed to the update. Updating
the Ateïs Studio software sometimes makes necessary to update the audio processor firmware also. To
do this, follow these steps:
1. Open Device Management Window.
2. Search and Connect to the device needs to update.