Characteristics – ATEIS IDA8C User Manual

Page 51

Product Features

amplifier.

Contact Outputs

8 logic outputs channels

to close/open circuit for an external device, this contact is normally open.

Evacuation Inputs

9 evacuation contact inputs that allow the monitoring of external contact. They also can be used in

UGA mode, trigger by a voltage polarization change.

24V DC Output

This connector supplies a 24VDC source.

24V DC Input

Main 24VDC power supply connector.

AC Power Socket

Main 110~240 V 1.2A, 47~63Hz AC power input with fuse. If 24V DC and AC power input at the

same time, IDA8C will use AC power, and switch to DC power if there is no AC power input.

Fuse Rating: 1.6A

4.1.3.4 Characteristics

Case

Dimension = 436mm (W) x 300mm (L) x 88mm (H).

Weight = 5Kg.

Color = RAL7016.

Power

Item

Voltage

Current Consumption

Comment

AC Input

100V~240V

1.2A@100V, 0.5A@240V Frequency:47Hz~63Hz

DC Input

18V~26V, Typical 24V

DC Output

18V~26V, Typical 24V

0.5A

AC Maximum Consumption = 45 W.

Amplifier Zone Outputs

Maximum level = 14 dB

Output Impedance = 50 Ohm

THD+N(Total Harmonic Distortion plus Noise)

Sensitivity

Minimum

Maximum

Unit

Frequency

0dBu

0.04

20~20kHz@+4dBu

-12dBu

0.06

20~20kHz@-2dBu

-24dBu

0.06

20~20kHz@-14dBu

-40dBu

0.06

20~20kHz@-30dBu

-54dBu

0.06

20~20kHz@-44dBu

This manual is related to the following products:

IDA8S